The Replacement Standoff for Stromberg Carlson Exterior RV Ladders # 8531-B comes in a 12" length, but can be cut down to exactly the size you need. You'll just have to push the inner nut (pictured below) further into the tube and then cutting off the excess. Just be careful not to push it too far in because getting it back out can be a challenge. view full answer...
The closest RV microwave we carry to match the dimensions of your Samsung MR1032UBC microwave is the Greystone Standard RV Microwave w/ Trim Kit # 324-000105. The trim kit will cover the width of your your opening but will not completely cover the 17" height. What you can do to solve that is to cut down a piece of wood to 3" by the length of your cutout hole and stain it to match your cabinets. You can use a pocket hole jig from your local hardware store and a few screws to mount the board... view full answer...
The Adco Olefin HD All-Climate + Wind RV Cover for Class A Motorhome # AD64ZR is designed for use in all climates so you should have no issues with your 125 degree weather in California. Of the materials on the market the Olefin is your best option in protection for your 2008 Four Winds Hurricane Motorhome.
I do want to note that this cover is designed for motorhomes up to 34' in length so you'll want to measure your motorhome before making your purchase to ensure you're ordering the... view full answer...
Unfortunately, I do not know. Weather stripping like the Rubber Window Edge Weather Strip for RVs # SR66ZR is not something that is standard and therefore we do not know what you have given your RV information.
Your best course of action is to compare it to what you currently have. For instance the Rubber Window Edge Weather Strip for RVs # SR66ZR you asked about is a press-in style that measures 1/4" wide x 1/2" tall and has a curve to it. If you are replacing the weather stripping around... view full answer...
There is a possible option for a trailer hitch receiver for your 2008 Four Winds motorhome, though no specific fits, which means you'll need to do a bit of measuring to confirm. So long as your motorhome has a 24" to 46" wide chassis, what you can use is a universal option from Draw-Tite:
- Multi-Fit Motorhome Trailer Hitch, 24" - 46" wide # 5350
I have added a link below to a video review as well as the instructions for you which I recommend taking a look at. view full answer...
RV roof covers like the Adco # 290-36042 for Class Cs like your 32-1/2-foot 2004 Four Winds Chateau 31Z are made to fit a range of RV lengths but they do not take into account any added height from accessory items like wheel ramps. The cover will certainly fit and secure properly to the RV since it works on RVs up to 36-feet in length but it is possible that the anchor straps will not reach down to the ramps.
It is possible you will need additional tie-downs like # EM04418 to secure the... view full answer...
Go To Results